ALL
SINGLE GAUNTLET ONLY
Piercan Isolator Single Glove 18700 E4 10" B Butyl S 8.5 available in Butyl materials, lengths and port sizes suitable for use in fixed and mobile isolator units.
This glove suits 10" Port 700 Length .4mm thick B Butyl BHP S8.5 (OTHER PORTS AND SIZE AVAILABLE) (BHP - Butyl High Performance)
ButylButyl is an elastomer made from isoprene - isobutylene copolymer rubber. it has low permeability to gas and good resistance to chemical products, which allows it to be used in operations carried out in highly oxidizing environments including active oxygen and free radicals.
This material is particularly recommended for:
Oxidizing products
Acids
Alkalis
Alcohols
Ketones
This glove is not suitable for handling:
Gasoline
Aromatic solvents
Oils & Plasticisers
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
Sizes available to choose below
10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 8
10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 9
10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 10
13750 Port 8" - Length 750 - .4mm thick B Butyl Size 7.5
13800 Port 8" - Length 800 - .4mm thick B Butyl Size 8.5
18800 Port 10" -Length 800 - .4mm thick B Butyl Size 8.5
18800 Port 10" -Length 800 - .4mm thick B Butyl Size 9.5
18800 Port 10" -Length 800 - .6mm thick B Butyl Size 9.5
97800 Port 12" -Length 800 - .6mm thick B Butyl Size 9 A/S
Piercan Isolator Single Glove 18800 E6 10" C NEOPRENE S10 Isolator Glove Box Gauntlets available in Neoprene materials, lengths and port sizes suitable for use in fixed and mobile isolator units. This glove GLV 10" 800 .6mm C Neoprene S10 GLV 10" 800 .6mm C Neoprene S10
Code: 18800 C 9 6/10(OTHER PORTS AND SIZE AVAILABLE)
Neoprene Neoprene is made of polychloroprene rubber. It provides good resistance to the effects of ozone ageing, oxygen, weathering, heating and chemical products. Neoprene is self-extinguishing material therefore providing excellent flame resistance for the gauntlet. It is the ideal elastomer, which provides best compromise to resist the conjugate action of several potentially harmful agents such as oil and ozone or heat and oil.
It allows operating in high oxidizing environments including ozone, active oxygen and/or free radicals. It is resistant to natural ageing.
Neoprene offers increased resistance to ozone, petroleum based chemicals and heat and oils, whilst maintaining good flexibility.
Neoprene is suitable for :
Oxidising products
Acids
Alkalis
Alcohols
Petrol
Mineral oils
This glove is not suitable for handling:
Chlorinated solvents
Aromatic solvents
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
SINGLE GAUNTLET ONLY
Piercan Isolator Single Glove 97800 E6 12" H Nr Latex Size 9 available in Natural Rubber Latex materials, lengths and port sizes suitable for use in fixed and mobile isolator units.
This glove suits 12" port 800 length .6mm thick H Nr Latex S9 (OTHER PORTS AND SIZE AVAILABLE)
Natural Rubber Latex Natural rubber is renown as one of the most comfortable and stretcable elastomers available. This means that over prolonged use, the material's properties ensure that hand fatigue is minimised.
Natural rubber is ideal for applications where tear and abrasion resistance is required.
Natural Rubber Latex is suitable for handling chemical products such as:
Acids
Alkalis
Alcohols
This glove is not suitable for handling:
Aromatic hydrocarbons
Chlorinated solvents
Ethers & esters
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
Sizes available to choose below
10330 Port 6" - Length 330 - .4mm thick H Nr Latex Size 8
10330 Port 6" - Length 330 - .4mm thick H Nr Latex Size 9
10330 Port 6" - Length 330 - .6mm thick H Nr Latex Size 8
10330 Port 6" - Length 330 - .6mm thick H Nr Latex Size 9
10700 Port 6" - Length 700 - .4mm thick H Nr Latex Size 7
10800 Port 6" - Length 800 - .6mm thick H Nr Latex Size 5
10800 Port 6" - Length 800 - .6mm thick H Nr Latex Size 7
10800 Port 6" - Length 800 - .6mm thick H Nr Latex Size 8
97800 Port 12" Length 800 - .6mm thick H Nr Latex Size 9*
SINGLE GAUNTLET ONLY
Piercan Isolator Single Glove Isolator Glove Box Gauntlets Y CSM available in CSM materials, lengths and port sizes suitable for use in fixed and mobile isolator units. This glove 97800 12" CSM (Hypalon) .4mm Size 9 (OTHER PORTS AND SIZE AVAILABLE)
CSM is Chlorosulphonated polyethylene and shows its true strength when exposed to high temperatures, oxidizing chemicals and oxidizing environments such as ozone, active oxygen and free radicals. It resists flex cracking and abrasion as well as the damaging effects of weather, UV radiation and ageing.
CSM has demonstrated long life in harsh environments and is used in a wide range of industrial and automotive applications that require high performance. In addition it offers good flame resistance and good mechanical and low temperature properties.
The type of CSM used in our range of isolator gauntlets has been chosen to give a low modulus product and a very flexible gauntlet.
This material is suitable for:
Oxidizing products
Acids
Alkalis
Alcohols
This glove is not suitable for handling:
Ketones
Aromatic solvents
Plasticisers
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
Comparison Tosoh vs Hypalon (CSM)
Available
The Gutser 1.2m Ceiling Bar with Nail Puller is an ideal tool for those involved in the ripping up of floors and similar demolition work. Good posture is enabled by the angled head design.. The nail puller allows to the user to avoid having to bend when removing nails from floors. The tool also features spear shaped points on the head of the tool to get under floor coverings – ideal when it comes to floor ripping jobs.
Features:
* Nail puller to save you having to bend over when removing nails from floors.
* Spear shaped points on the head of the tool to get under floor coverings when ripping them up.
.
* Angle of the head helps the user to maintain a vertical posture.
The Gutser 1.5m Bar with Wheels and Nail Puller allows you to say goodbye to
tedious flooring ripouts and tough demoiltion jobs. Its handy nail puller means you no longer have to get down on your knees to pull out those nasty nails that just won't budge from your floor.
Features:
* Grants the user a stable position with max leverage when ripping out floors.
* No need to bend down when removing old nails from the floor.
* Users can keep an almost vertical stance when ripping out an old floor or demolishing.
The Gutser 1.2m Ceiling Bar with Nail Puller is very handy for those undertaking demolition work above the floor (for e.g., ceilings, cabinets, walls). Maximum leverage is granted by the angled head design which helps maintain good posture during demolition work. A nail puller is fitted, saving the user from having to bend when removing nails from floors. This gutster bar is also a handy tool for tile demolition.
Features:
* Nail puller to save you having to bend over when removing nails from floors.
* Tubular Handle
.
* Cast head
Ideal demoliton and floor ripping work in small or confined areas, (e.g. bathrooms), the Gutser 762mm Baby Gutster Bar with Nail Puller is and ideal tool for those engaged in flooring ripouts and tough demoiltion jobs. Its handy nail puller means you no longer have to bend down to pull out those stubborn nails.
Features:
* Sufficiently shor to use as a demolition and floor ripping tool in tight or confined areas.
* This demolition tool is designed so that there's no need to bend down when removing old nails from the floor.
The Ripper RB01 LONGHORN - Adjustable head wrecking bar with nail puller is a heavy duty demolition crow bar that gives the user great manoeuvrability and leverage. This is enabled by the choice of no less than 15 lock positions and a 180 degree indexing head. Unlike other demolition bars, the Ripper range works for the user, not the other way around. The nail puller makes removing stubborn floorboard nails so much easier. All in all, this is one of the most functional and versatile wrecking bars on the market. Features:
* Nail puller
* This crow bar tool has a 180 degree indexing head, unlike most demolition bars
* Head features sharp pointed forks (ideal for piercing and driving between gaps)
* 15 lock positions
* Non-slip knarled grip on the crow bar handle
* 1.1m tubular steel handle
The Ripper RB02 LONGHORN - CLAW - Adjustable head crow bar with separate nail puller head is an extremely versatile utility/pry bar with a range of uses in demolition work. It features a 90 degree flat head with 180 degree indexing ability. Prying force is optimised by a raised ‘wedge’ on the head. The nail puller on this crow bar tool makes extracting those stubborn nails from timber a pleasure, its sharp points being made of solid steel. This a very practical and efficient demolition and wrecking tool. Features:
* This pry bar tool has a 90 degree flat head that indexes over 180 degrees, unlike most demolition bars
* Head features sharp pointed forks (ideal for piercing and driving between gaps)
* Raised ‘wedge’ allows the user to get optimum prying force
* 460mm long
* Solid steel handle with soft feel grip
* Solid steel nail claw
The Ripper RB03 RIPPER - Adjustable head crow bar with non slip handle is an extremely versatile utility/pry bar with a range of uses in demolition work. It features an extra wide 90 degree flat head that has an indexing ability of 180 degrees. This is quite effective in avoiding damage to the surface that the bar is being pryed against. The handle on this crow bar is made from solid steel, with a soft ergonomic grip. This serves to make this wrecking bar comfortable to use without impacting on control and durability. This prying bar also includes a nail slot which makes removing those stubborn floorboard nails effortless. The head also features a raised ‘wedge’. This helps to maximise the prying force of this crow bar. Features:
* This pry bar tool has a 90 degree flat head that indexes over 180 degrees, unlike most demolition bars
* Head features sharp pointed forks (ideal for piercing and driving between gaps)
* Raised ‘wedge’ allows the user to get optimum prying force
* 460mm long
* Solid steel handle with soft feel grip
* Solid steel nail claw
Technical Product Files
No product files are currently available for this product.